China Spunbond Nonwoven Fabric Making Machine

Agriculture nonwoven fabric refers to a type of fabric made from synthetic or natural fibers that are bound together using a mechanical process such as needle punching or spunbonding. This fabric is designed for use in agricultural applications such as crop covers, soil stabilization, erosion control, and weed control.
|
Model |
Effective width |
Daily capacity |
Speed |
Spinning system |
GSM Range |
Machine dimension Length*Width*Height |
|
HG-1600S |
1600MM |
5000Kg |
200M/Min |
Spunbond |
10-200 |
20*8*11 meter |
|
HG-2400S |
2400MM |
7000Kg |
20*11*11meter |
|||
|
HG-3200S |
3200MM |
10000Kg |
20*15*11meter |
|||
|
HG-1600SS |
1600MM |
9000Kg |
350M/Min |
Spunbond |
8-150 |
35*10*11meter |
|
HG-2400SS |
2400MM |
13000Kg |
35*12*11meter |
|||
|
HG-3200SS |
3200MM |
16000Kg |
35*15*11meter |
|||
|
HG-1600SSS |
1600MM |
12000Kg |
400M/Min |
Spunbond |
8-100 |
40*10*11meter |
|
HG-2400SSS |
2400MM |
16000Kg |
40*12*11meter |
|||
|
HG-3200SSS |
3200MM |
23000Kg |
40*15*11meter |
|||
|
HG-1600SSS |
1600MM |
12000Kg |
400M/Min |
Spunbond |
8-100 |
40*10*11meter |
|
HG-2400SSS |
2400MM |
16000Kg |
40*12*11meter |
|||
|
HG-3200SSS |
3200MM |
23000Kg |
40*15*11meter |
|||
|
HG-1600SMS |
1600MM |
10000Kg |
400M/Min |
Spunbond/ Meltblown/ Spunbond |
8-80 |
40*15*11meter |
|
HG-2400SMS |
2400MM |
14000Kg |
40*18*11meter |
|||
|
HG-3200SMS |
3200MM |
18000Kg |
40*25*11meter |
|||
|
HG-1600SMMS |
1600MM |
12000Kg |
500M/Min |
Spunbond/Meltblown/Meltblown/Spunbond |
8-80 |
45*15*11meter |
|
HG-2400SMMS |
2400MM |
17000Kg |
45*18*11meter |
|||
|
HG-3200SMMS |
3200MM |
23000Kg |
45*25*11meter |

It is lightweight, durable, and can be designed to be water-permeable or impermeable depending on the application. Agriculture nonwoven fabric can also be used as a lining for greenhouses or as a protective covering for livestock. It is environmentally friendly and can significantly reduce the use of pesticides and other chemicals in agriculture.
1. Full Technical Specifications - SSMMS Composite Line
| Parameter | SSMMS-1600 | SSMMS-2400 | SSMMS-3200 |
|---|---|---|---|
| Line Type | Spunmelt composite line (5-die-head, SSMMS) | ||
| Composite Structure | S1 + S2 + M1 + M2 + S3 (5-layer) | ||
| Spinning Beam Configuration | 5 beams: 3× Spunbond + 2× Meltblown | ||
| Extruder Quantity | 5 sets (3× Spunbond screw + 2× Meltblown screw) | ||
| Spunbond Screw Diameter | Ø130 mm | Ø150 mm | Ø170 mm |
| Meltblown Screw Diameter | Ø90 mm | Ø120 mm | Ø150 mm |
| Effective Width | 1,600 mm | 2,400 mm | 3,200 mm |
| Raw Material | Polypropylene (PP) chips | ||
| Production Speed | ≤ 500 – 600 m/min | ||
| Fabric Weight Range | 8 – 150 g/m² | ||
| Spunbond Filament Denier | 1.5 – 2.0 den | ||
| Meltblown Fiber Diameter | 2 – 5 µm | ||
| Melt Flow Index (MFI) | Spunbond: 25 – 40 g/10min · Meltblown: 400 – 1,500 g/10min | ||
| Daily Output | 10 – 18 tons | 15 – 25 tons | 20 – 30 tons |
| Annual Output | ≈ 4,500 tons | ≈ 6,500 tons | ≈ 8,500 – 10,000 tons |
| Extruder Motor Power (Spunbond) | 90 kW × 3 | 110 kW × 3 | 132 kW × 3 |
| Extruder Motor Power (Meltblown) | 22 kW × 2 | 37 kW × 2 | 55 kW × 2 |
| Barrel Heating Power | 45×3 + 18×2 kW | 87×3 + 30×2 kW | 90×3 + 37×2 kW |
| Spinneret Type | Enka / Kassen brand; spunbond 3,000–5,000 holes/m, meltblown die tip | ||
| Calender Type | Two-roll hot calender, thermal oil heating, S-roll deflection compensation | ||
| Winding System | Fully automatic, auto splicing, max. parent roll Ø ≥ 2,000 mm, in-line slitting | ||
| Total Installed Power | ≈ 2,000 – 2,500 kVA | ≈ 2,500 – 2,800 kVA | ≈ 2,800 – 3,200 kVA |
| Specific Energy Consumption | 1,500 – 2,200 kWh / ton | ||
| Power Supply | 380V / 50Hz (domestic) · 440V / 60Hz or 400V / 50Hz (export) | ||
| Machine Dimensions (L × W × H) | 50 × 18 × 11 m | 50 × 22 × 11 m | 55 × 25 × 11 m |
| PLC / Automation System | Siemens S7-1500 PLC + WinCC HMI; in-line surface defect inspection; cloud-integrated smart control | ||
| Operators per Shift | 6 – 7 persons | 7 – 8 persons | 8 – 9 persons |
| Embossing Patterns | Sesame point, diamond, oval, cross, linear, or customized | ||
| Technology Generation | 5th Generation | ||
| Service Model | Turn-key Project | ||
2. Complete Line Comparison: S vs SS vs SSS vs SMS vs SMMS vs SSMMS
| Parameter | S (1-Die) | SS (2-Die) | SSS (3-Die) | SMS (3-Die) | SMMS (4-Die) | SSMMS (5-Die) |
|---|---|---|---|---|---|---|
| Die Head Quantity | 1 | 2 | 3 | 3 | 4 | 5 |
| Layer Structure | S | S+S | S+S+S | S+M+S | S+M+M+S | S+S+M+M+S |
| Spunbond Beams | 1 | 2 | 3 | 2 | 2 | 3 |
| Meltblown Beams | 0 | 0 | 0 | 1 | 2 | 2 |
| Production Speed | 150-200 | 250-350 | 350-450 | ≤400 | ≤400-500 | ≤500-600 |
| Daily Output (3200mm) | 10-15T | 15-20T | 20-30T | 16-20T | 14-24T | 20-30T |
| Fabric Weight | 10-200 | 8-150 | 8-100 | 8-80 | 8-150 | 8-150 |
| Installed Power (3200mm) | ≈300 | ≈800 | ≈900 | ≈1,600 | ≈2,200 | ≈2,800-3,200 |
| Machine Length | ≈15m | ≈25m | ≈35m | ≈35m | ≈45m | ≈50-55m |
| Barrier Properties | None | Low | Medium | High | Very High | Ultra High |
| BFE Rating | N/A | N/A | N/A | ≥95% | ≥98% | ≥99% |
| Typical Price Range | $180-300K | $350-550K | $500-880K | $400-880K | $600-1,200K | $800-1,500K |
| Best For | Packaging, agriculture, bags | Hygiene, packaging | Premium hygiene | Surgical, hygiene | Medical grade, N95 | Premium PPE, surgical, high-volume |
3. SSMMS Production Process Flow
| Step | Process | Description |
|---|---|---|
| 1 | Polymer Preparation | PP chips fed into 5 hoppers (3 spunbond + 2 meltblown); different MFI grades - spunbond MFI 25–40, meltblown MFI 400–1,500 |
| 2 | Spunbond Layer 1 (S1) | First spunbond beam spins continuous filaments; quenched by cross-flow air; drawn by suction; deposited onto forming wire |
| 3 | Spunbond Layer 2 (S2) | Second spunbond beam deposits additional filament layer onto S1 - double spunbond layers provide enhanced tensile strength and fabric uniformity |
| 4 | Meltblown Layer 1 (M1) | High-velocity hot air attenuates molten polymer into microfibers (2–5 µm); deposited onto S2 web while still warm |
| 5 | Meltblown Layer 2 (M2) | Second meltblown beam adds another microfiber layer - double meltblown provides superior barrier and filtration efficiency |
| 6 | Spunbond Layer 3 (S3) | Third spunbond beam deposits continuous filaments onto M2 - completes the S1+S2+M1+M2+S3 five-layer composite structure |
| 7 | Bonding (Calendering) | 5-layer web passes through heated double-roll calender; thermal bonding at embossing points creates strong, breathable, ultra-soft fabric |
| 8 | Winding & Slitting | Fabric wound onto parent roll (max. Ø 2,000mm); in-line slitting to customer-specified widths; auto splicing for continuous production |
4. Application Areas - SSMMS Composite Fabrics
| Industry | End Products | Typical Weight |
|---|---|---|
| Medical & Surgical | Premium surgical gowns, surgical drapes, isolation suits, sterilization wraps | 30 – 60 g/m² |
| Personal Protection (PPE) | N95/KN95 mask components, protective coveralls, face shield components | 15 – 50 g/m² |
| Hygiene Products | Premium diaper backsheet, sanitary napkin topsheet, adult incontinence products | 10 – 30 g/m² |
| Filtration | High-efficiency air filtration media, liquid filter substrate, HVAC filter layers | 20 – 80 g/m² |
| Industrial | Cleanroom wipes, absorbent pads, sterile packaging | 30 – 100 g/m² |
| Agriculture | Crop covers, seedbed covers (light-grade composite) | 15 – 40 g/m² |
5. SSMMS Fabric Key Performance Metrics
| Property | Typical Value (40 g/m²) | Test Standard |
|---|---|---|
| Bacterial Filtration Efficiency (BFE) | ≥ 99% | ASTM F2101 |
| Particle Filtration Efficiency (PFE, 0.1µm) | ≥ 98% | ASTM F2299 |
| Differential Pressure (Breathability) | ≤ 15 Pa/cm² | EN 14683 |
| Hydrostatic Pressure | ≥ 40 cmH₂O | AATCC 127 |
| Tensile Strength (MD) | ≥ 50 N/5cm | ISO 9073-3 |
| Tensile Strength (CD) | ≥ 35 N/5cm | ISO 9073-3 |
| Elongation at Break | 40 – 80% | ISO 9073-3 |
| Weight Uniformity (CV) | ≤ 3% | ISO 9073-1 |



Why Choose Us
20+
HG Nonwoven fabric making machines have already successfully exported to 20+ countries and regions which made HG nonwoven famous and won the good reputation.
300+
HG Nonwoven have already successfully installed more than 300+ nonwoven fabric production lines around the world and keeps growing in good growth rate every year.


FAQ
Q: What's SSMMS line?
A: It's a 5 die head line. Has 3 spunbond beam and 2 meltblown beam. (S1+S2+M1+M2+S3) Where SMS only have 3 die head (S1+M1+S2). With one more spunbond beam will give you higher tensile strength about 50% more then SMS. And one more meltblown beam will increase the barrier property dramatically. BFE ≥ 99% vs SMS ≥ 95% and Hydrostatic 50-80% more. Which make SSMMS is the highest level line we have.
Q: Why SSMMS?
A: It will add one more spunbond layer in between (S2). You will gain higher tensile strength because there are 3 spunbond layer together. Also will help to increase uniformity and weight variation CV≤3% (compare to SMMS ≤4%). Because it have more layer it will also give you more stable structure for lighter weight fabric. Of course the investment will be higher compare to SMMS but worth it if you want to produce high end product.
Q: Can I produce SMS product?
A: Yes, you can choose which beam you want to run. So you can run it as SMS, SMMS, SSS, SS or even just S. Depending on what product you want to produce.
Q: What's the benefit of ultra high precision meltblown die head?
A: We use ultra high precision meltblown die head and spinneret on our 5th gen SSMMS line. To create finer filament and achieve a super soft nonwoven. That will give you a higher BFE result for your medical product.
Q: Power consumption?
A: For 3200mm machine you will need around 2800-3200kVA total power. Specific energy will be around 1500-2200KWH/ton. Which is almost 75-100% more compare to SMS line. Make sure your transformer can support the load for 2 unit if needed.
Q: How long is the lead time?
A: Machine lead time will take around 150 days to complete. And it will take another 90-100 days to install and commissioning at your site. We will provide turn key solution to our customer.
Q: Warranty?
A: We provide 12-24 months warranty from date of installation. Any worn out part is not covered. We provide remote support through our smart control system. Or send engineer to your site if necessary.
Q: How big my factory need to be?
A: Since SSMMS is our longest line you will need to allocate a bigger space for your factory. For a 3200mm line it will take around 55m x 25m x 11m for the main machine. Plus your utility. So roughly you will need 2000m2 of space. (For reference SMS is 35m and SMMS is 45m)
Q: Can I use different grade of PP?
A: Since we have 5 extruder you can feed different type of PP. Normally Spunbond will use PP with MFI 25-40 and Meltblown will use PP with MFI 400-1500. You can also feed different color masterbatch into each extruder to create multi color fabric.
Google Website:www.hgnonwoventech.com
Alibaba Website: https://pjhaigong.en.alibaba.com
Facebook:www.facebook.com/hgnonwoven/
YouTube:www.youtube.com/@leoliu3636
Hot Tags: china spunbond nonwoven fabric making machine, China, suppliers, manufacturers, factory, shirt pp spunbond nonwoven machinery, pp nonwoven fabric machine for scarf, trouser pp spunbond nonwoven machinery, conduit pp spunbond nonwoven machinery, container pp spunbond nonwoven machinery, pp nonwoven fabric machine for trouser
You Might Also Like
Send Inquiry













